Headstock Bearings and Seals: Yamaha SRX400 SRX 400 (1985-1988) Suzuki CS80 The coil has 1 spade

The coil has 1 spade connector with 1 HT lead and spark plug cap which is included

these will not fit models with the 1 outlet

This set of head stock bearings are taper roller style and have been manufactured to replace the original set of steering bearings on a Suzuki T125 for the years and models shown above

This set of brake pads will fit the front and rear brake on a Yamaha FZR400 for the years and models shown above

This clutch cable has been designed to replace the original cable on a Suzuki DR750 for the years and models shown above

Headstock Bearings and Seals: Yamaha SRX400 SRX 400 (1985-1988) Suzuki CS80 The coil has 1 spadeBrand new set of headstock steering bearings and seals to fit: Yamaha SRX 400 (1985 1988). This set of head stock bearings are taper roller style and have been manufactured to replace the original set of steering bearings on a Yamaha SRX400 for the years and models shown above. Top sized: 25mm x 48mm x 15mm. Bottom sized: 30mm x 48mm x 15mm. All sizes set out ID x OD x Thickness. The seals are not included in the measurements. If you require different